wading into the tide
This commit is contained in:
parent
207f2d5763
commit
cfe4897f96
|
|
@ -0,0 +1,92 @@
|
|||
# Wading into Tidal
|
||||
|
||||
I stumbled across [TidalCycles](https://tidalcycles.org/) lately.
|
||||
It exists at my happy cross-section of automation, rave music and open source software.
|
||||
It's a [livecoding]() language/interpreter/instrument based on Haskell (in which I am also particularly interested!) and I decided to try it out.
|
||||
|
||||
This is a short post explaining the steps I took and resources I used to install and get started playing with Tidal on Arch Linux using Neovim.
|
||||
|
||||
# Realtime Scheduling
|
||||
|
||||
First I had to .
|
||||
Similarly to a DAW - I suppose Tidal is kind of a DAW? Audio engineers will squirm - it's important for Tidal to have high-precision timing, unlike most software.
|
||||
This kind of control can be risky, so most systems don't make it available straight out the gate - Arch is one of them.
|
||||
See [this post](https://jackaudio.org/faq/linux_rt_config.html) for a more detailed explanation, as well as a list of distributions which do enable realtime scheduling straight away.
|
||||
In my case, I found a section on the [JACK ArchWiki page](https://wiki.archlinux.org/title/JACK_Audio_Connection_Kit#Realtime_scheduling_and_additional_resources) that provided an easier solution.
|
||||
Install the `realtime-privileges` package and add your user to it:
|
||||
|
||||
```
|
||||
sudo pacman -S realtime-privileges
|
||||
sudo usermod -a -G realtime ktyl
|
||||
```
|
||||
|
||||
As with all group changes, you'll need to re-log or reboot for changes to take effect.
|
||||
|
||||
# Linux Audio
|
||||
|
||||
There are three components to my local audio setup in the context of Tidal.
|
||||
First is [JACK](https://wiki.archlinux.org/title/JACK_Audio_Connection_Kit#Realtime_scheduling_and_additional_resources), which is a low-latency audio daemon with a confusing number of implementations.
|
||||
There is a list and comparison on the ArchWiki page, but I found the package I needed to install was `pipewire-jack` (as opposed to `jack` or `jack2`), which leads nicely into Pipewire, the second component.
|
||||
|
||||
[Pipewire](https://wiki.archlinux.org/title/Pipewire) is a multimedia framework which aims to solve audio problems on Linux Once And For All.
|
||||
It's an abstraction and doesn't directly play audio itself, rather deferring that responsibility further down the line.
|
||||
|
||||
To actually play audio, I am using the [PulseAudio](https://wiki.archlinux.org/title/PulseAudio) which I already had installed.
|
||||
However, this didn't work out of the box because Pulse and Pipewire had no idea about each other.
|
||||
To resolve this, I had to install the `pipewire-pulse` package.
|
||||
|
||||
# SuperCollider and SuperDirt
|
||||
|
||||
Now we're getting to the fun stuff!
|
||||
I mostly followed [this guide](https://roosnaflak.com/tech-and-research/install-tidal-cycles-on-arch-linux/), but I found I had to do a couple things a little differently - maybe it's a bit of a dated guide? - which I'll describe here.
|
||||
|
||||
First I installed `haskell-tidal` from the AUR (I use the [`yay` AUR helper](https://github.com/Jguer/yay).
|
||||
Then, as I wanted to use Neovim, I had to install the `tidalcycles/vim-tidal` plugin, using the [`vim-plug` plugin manager](https://github.com/junegunn/vim-plug), and remembering to run `:PlugUpdate`.
|
||||
|
||||
The guide then describes steps to make the `tidal` binary available system-wide - however I found the path it describes didn't exist.
|
||||
Instead, based on the path `vim-plug` installs to (`~/.local/share/nvim/` rather than `~/.config/nvim/`), I found my actual steps were:
|
||||
|
||||
```
|
||||
cd ~/.local/share/nvim/plugged/vim-tidal
|
||||
sudo make install
|
||||
```
|
||||
|
||||
Next I opened SuperCollider with `scide` and installed SuperDirt.
|
||||
Again the guide seemed a bit out of date in the version of SuperDirt it lists - I found I needed to use `"v1.7.2"` as the version string, rather than `v1.1.3` as listed.
|
||||
By the time you're reading this, the version listed here may be out of date, so if you have trouble with this stage that's what I'd check first.
|
||||
|
||||
```
|
||||
Quarks.checkForUpdates({Quarks.install("SuperDirt", "v1.7.2");
|
||||
thisProcess.recompile()})
|
||||
```
|
||||
|
||||
To run code in SuperCollider, select the block you'd like to execute and press `Ctrl + Enter`.
|
||||
|
||||
At this stage, everything should be installed (notwithstanding any error messages, troubleshooting section not included) and we should be ready to go.
|
||||
|
||||
Start SuperDirt up in SuperCollider:
|
||||
|
||||
```
|
||||
SuperDirt.start;
|
||||
```
|
||||
|
||||
Now, open a tidal file in Neovim:
|
||||
|
||||
```
|
||||
nvim test.tidal
|
||||
```
|
||||
|
||||
And enter a Tidal pattern!
|
||||
|
||||
```
|
||||
d1 $ sound "bd sn"
|
||||
```
|
||||
|
||||
To play it, put the cursor in the line and press `Ctrl + E`.
|
||||
Neovim should open a new window containing a Tidal terminal, and find and connect to the runing Tidal instance.
|
||||
|
||||
That's it!
|
||||
Have fun making beats.
|
||||
If you have any trouble with this guide, there's an off chance I've learned a bit more about in the interim, so feel free to [ping me an email](mailto:me@ktyl.dev)!
|
||||
Or of course, ask the nice folk over at [Tidal Club](https://club.tidalcycles.org/).
|
||||
|
||||
Loading…
Reference in New Issue